Laptops usually make normal hits. The most heating in the laptop is from the CPU. To control the temperature, a particular type of copper is applied on it (to absorb heat). And a fan is applied to keep this hit shink cool. This hit shink controls the temperature of both VGA chip and CPU. The CPU fan does not move continuously in the laptop, it moves only when the temperature of the hit shink goes above a certain range. A thermal diode or sensor circuit is used for this. But if the laptop is an over hit then it is a serious problem.
These problems occur when the laptop is over heat…
-Lipp gets hanged.
-Lipp works very slowly.
-Lipp is closed by giving an error message of over hit.
-Lipop starts to restart for some time.
All these indications indicate that your laptop is getting heat.
How to solve when over heat:- In the laptop, dust etc. accumulate on the heat shink, due to which the heat of the fan heat shink is not sent out and the temperature of the shink increases, due to which the laptop gets warmer than the CPU limit and has an impact on its working ability.
For this, clean the dirt from the heat shink.
The processor is rapidly heated even when there is more load on the CPU in the laptop. For this, go to the task manager and close the process without any meaning.
The processor starts getting very hot even after the virus in the laptop, because the processor keeps working continuously. For this, scan the laptop system with antivirus.
Sometimes the laptop battery also causes laptop to heat up. In such a situation the battery is spoiled.
Even after taking the above measures, if the laptop is overheating, there is a malfunction in the motherboard of the laptop.
Thermal sensing circuit is not working in the laptop.
Capital in the motherboard of the laptop may be short or leaked. (Especially the capacitor on the supply path)
The laptop felt the CPU (processor) is bad. VGA chip may be short in laptop
The graphics card or chip in the laptop may deteriorate.
